Many DIYers are happy to paint their projects but freeze when they think about staining it. Will it look right? Will I ruin it? Where do I start? Hear is the truth: Staining and sealing your own furniture is easier than painting. Even if you’ve never attempted to apply stain or apply wipe-on-poly yourself you will get great results if you follow the steps in this Youtube Video.
SEE! So easy only a politician could mess it up!
Here’s the steps and the products I used to finish this Rustic Style Barn Door.
- Always sand your project up to 220 grit: Sand paper I use: Mirka 5-Inch 8-Hole Dustless Hook-and-Loop Sanding Disks
- Clean off all the dust with a slightly damp lint free cloth
- Apply stain. I like using a brush to get the stain in all the nooks then wipe the extra off with a lint free cloth. The Stain I used on this project is Provincial by Minwax:
- 4) Once Dry you will apply a least two coats of Minwax Wipe on Poly, I like Satin:
Now I like to use old based stains and finishes. The results are consistently better than with water based stains and polyurethanes. If you’re finishing your Wooden Dog Kennel don’t worry once dry it is completely safe. In fact polyurethane is food safe when fully cured, but I still wouldn’t eat it. Because we’re using oil based products you’ll also want some nitrile gloves and Paint Thinner/Mineral Spirits for clean up.
Here’s a Front Door I refinished following this same process but using exterior grade Spar Urethane.
Not quite up to doing it yourself? Well if you’re in the Brazos Valley Area CONTACT ME and I’ll be happy to help make your home look amazing.
If you have any questions or comments leave them below.