Kreg Tools and Jigs are Invaluable to Me

This is part of the New Tool Tuesday series.  On Tuesdays, I post an article reviewing the tools I use on the jobsite. 

The Kreg Pocket Hole jig is owned by almost every woodworker I know, and every woodworker should have one.  But Kreg also makes a lot of other useful tools and jigs.  Over time, I have found that I really like most of their tools.  Their prices are very reasonable as well.  These are tools I actually own and use professionally on most of my work.

The Kreg K4 Master System

Read more

Rustic Display Shelf with Adjustable Shelves

I made this display shelf for a repeat customer who has purchase several of my projects.  I used reclaimed southern yellow pine and used a vinegar/steel wool solution to age the wood.

For this project I purchased and used for the first time the KREG Shelf Pin Jig. It is a straight-forward and simple jig for small projects.  If you drill shelf pins for a living then you’ll want something different.  If you’re a DIY’er or a small-scale shop like me this is a great tool to have for occasional use.

The dimensions for this project are 4ft from the base to the top shelf.  I staggered the sides 2-4 inches above that.  It is 3ft wide and 12in deep.  The center section is 18″ wide the two sides are around 8″ wide.  I forget the exact measurements.

From Concept to Reality: Starting my Modular Shop

modular 8My Pinterest boards are filled with ideas, projects, and cool things that I want to make someday.  The same is true of my to-do lists.  I feared my idea for a modular shop cabinet would be added to the ever growing list of projects I haven’t gotten to yet.

Well I’m happy to report that I was able to build two cabinets over the weekend. I modified my Sketch-up design a little bit, but anytime you take a design to execution you make changes.

Mod Cabinet 2I made a simple jig the route all the dados for the self guides.  I spaced the dados five inches apart (from top edge to bottom edge). I assembled everything with my Kreg Jig (If you don’t own one buy one).  I decided not to use glue for these since they were my ‘prototypes’ and I can disassemble and remodel them if I ever need to.

Mod Cabinet 5

Since 1/2″ plywood is slightly narrower than 1/2″, a 1/2″ straight bit worked great to make a snug drawer slide.  I made one 2 3/4″ deep drawer for the very top.  This is a catch all for commonly used and misplaced tools.

The plan now is to build drawer specifically designed for tools and tasks.  I remodeled my pocket hole tool box to fit in the cabinet.  Next will be a box specifically for my random orbital sander and accessories.  I have the freedom to layout the boxes as I need with dividers and such and since everything will fit the same size cabinet I can rearrange until it’s perfect.

I plan on building a rolling cabinet specifically for all of my automotive tools. I have a nice Craftsman Socket set with it’s own case that I sized the cabinet around and can put all of my specialty tools with it and make working on the cars less miserable.

So far I’m happy with the execution of this idea and am confident of it’s long term viability.

Mod Cabinet 6

What do you think and what solutions do you have to share for shop organization?

%d bloggers like this: